Epson Home Cinema 5050UB: throw distance & specs
4K PRO-UHD · 2,600 lumens · throw ratio 1.35–2.84. For a 100″ screen it sits 9.8–20.6 ft away.
The Epson Home Cinema 5050UB sits 9.8–20.6 ft from a 100″ screen and about 11.8–24.8 ft from a 120″ screen, set by its official 1.35–2.84 throw ratio. At 2,600 lumens it pairs best with a matte-white screen in the dark, or an ALR screen with some ambient light.
Throw ratio
1.35–2.84
Brightness
2,600 lumens
Resolution
4K PRO-UHD
Type
lamp
| Throw ratio | 1.35–2.84 |
| Brightness | 2,600 lumens |
| Resolution | 4K PRO-UHD |
| HDR | Yes |
| Light source | lamp |
| Type | Standard throw |
| Input lag | 22.5 ms |
| Price | ~$2,999 |
Throw-distance calculator
Epson Home Cinema 5050UB — distance for a 100″ screen
9.8–20.6 ft
Lens-to-screen distance. Zoom (if any) lets you fine-tune within the range.
Throw distance by screen size
How far the Epson Home Cinema 5050UB sits from the screen at common 16:9 sizes, across its full zoom range.
| Screen (16:9) | Image width | Throw distance |
|---|---|---|
| 90″ | 78″ | 8.8–18.6 ft |
| 100″ | 87″ | 9.8–20.6 ft |
| 120″ | 105″ | 11.8–24.8 ft |
| 150″ | 131″ | 14.7–30.9 ft |
Every projector’s throw distance, by screen size: 100-inch screen · 120-inch screen
Which screen for the Epson Home Cinema 5050UB?
The Epson Home Cinema 5050UB is a standard-throw projector, so it works with a matte-white screen in a dark room or an ALR screen if you watch with some ambient light. Match the screen size to the throw distance the calculator gives for your room.
Frequently asked questions
Compare with
Guides for this projector
How to calculate projector throw distance
Throw distance = image width × throw ratio. First convert the screen diagonal to width (for 16:9, width = diagonal × 0.872), then multiply by the projector's throw ratio. For a 100-inch screen (87 inches wide) and a 1.5 throw ratio: 87 × 1.5 = 131 inches, about 11 feet.
GuidesTrue 4K vs pixel-shift 4K
Native 4K projectors put 8.3 million real pixels on screen; pixel-shift (XPR) projectors flash a 1080p or 2.7K chip 2-4 times per frame to approximate 4K. Native is slightly sharper on fine detail but costs much more; pixel-shift looks 4K to most eyes at normal viewing distance and covers nearly all affordable "4K" projectors.
GuidesProjector ceiling mount height
Mount the projector so its lens lines up with the top of the image when the projector has 0% offset (most do), then fine-tune with lens shift. A 100-inch 16:9 image is 49 inches (124 cm) tall, and the screen bottom usually sits 24-36 inches (60-90 cm) above the floor for seated eye level.
Not sure it fits? Run your exact screen size through the calculator.
Back to top →Updated